How To Clean Pool Cover?

Maintaining your pool cover will help you save time and money. We take these actions to prolong the life of your pool cover. It will also prevent a VOID in your warranty if you have one or have had one for some time. “Owner misuse” is defined as failing to take one or more of the following actions. It will result in void warranties. A few of the most frequent errors made while using a pool cover are having too much chlorine in the pool. Leaving it rolled up in the sun for a long is another common mistake.

Top 6 Tips for Pool Cover Care

Most pool owners rely on chemicals, equipment, and water to maintain their pool. But, keeping your pool cover clean is as crucial. Maintaining your pool cover might help it last longer. Thus, how can you maintain the best possible condition for your pool cover? Check out our best advice below.

Clear leaves and other debris regularly

Your pool cover may keep leaves and debris out. But, it’s vital to remove material from your cover. Leaves can discolor it and sharp sticks can poke holes in it. Any debris can be removed with a broom or a hose.

Regularly check for holes or tears

Also to the risk of debris falling into your pool, a hole in your pool cover could cause water to evaporate. This can cause the water to become skewed and the levels to plummet. Make sure there are no tears or holes in the pool cover. Check it whenever you are cleaning or adjusting the water in your pool. If you do discover a tear or hole, get in touch with your pool cover provider to get it fixed.

Also read our related article on the topic How to raise free chlorine in pool?

Clean it up or bring it down

To help improve its life, pool covers should be cleaned every few months or around every three months. The sun dries out your pool cover and leaves a chemical residue on it once it has come into contact with pool water. The life of your pool cover may be shortened by this residue, which can also cause harm. Reduce the quantity of residue by hosing down or wiping down your pool cover.

Use a roller

The pool cover roller is an excellent piece of equipment. It improves ease when adding and removing pool covers. Make sure you place a cover on your pool cover while it’s rolled up to help extend its lifespan. When not in use, this cover can help shield your pool cover from sun damage.

Leave the cover off after adding chemicals

To help prevent premature aging of the pool cover, leave the cover off for about two hours after adding chemicals.

Clean the motor box

It’s crucial to maintain the motor box of your automatic pool cover to keep it in good operating order. While cleaning the cover on your pool, also spend some time:

• Clear the motor box of any dirt or debris that can cause the motor to run more.
• Hose off the tracks
• Examine the motor for any damage to the equipment.

Our staff of skilled pool technicians can assist you if you’re not sure how to inspect the equipment. They can also help you clean the motor box. Click this link to locate the closest Poolwerx. Ask one of our staff members to visit your home to check both your pool and its cover. A pool cover is a terrific asset. It can help you save time and money on electricity and chemical costs when cleaning your pool. It works, no matter when you use it. But, to get the most out of your pool cover, it needs to be maintained.

Read Also: How to Unclog a Pool Skimmer Line?

Some Advice for Maintaining a Clean Pool Cover

Here are some pointers to help you maintain the cleanliness of your pool cover.

Daily Maintenance

Ensure that the surface of the pool cover is cleared of any debris. When it’s time for a thorough cleaning, this will help avoid stains and make cleaning easier. If the cover on your pool is mesh, be sure to hose it out frequently to prevent dirt and debris from building. If you detect any spots or stains on the pool cover, clean them with a gentle soap and water solution. The best pool cover for you may need to be investigated, depending on the weather where you live. Different cover kinds may complicate routine maintenance.

Regular Cleaning

Make sure you clean the cover on your pool once a month or more. To do this, use a hose to rainy down the cover, and then use a brush to brush away any dirt or rubble. You can also use a pressure washer to clean the pool cover but do it wisely and at a low pressure to avoid damaging the surface. If you have a vinyl pool cover, clean it with a mild soap and water solution. You can also use a vinyl cleaner to keep it in good condition.

Buying a pool cover pump is just another fantastic way to maintain the cleanliness of your pool cover. Look through them to see which of my top choices for pool cover pumps meet your budget.

Deep Cleaning

Every few months, give your pool cover a thorough cleaning to get free of any dogged accrual or stains. This can be done by sopping the cover for a few hours in a water and bleach solution. After the cover has sodden, clean away any last bits of build-up or dirt using a brush. After cleaning, make sure to give the cover a thorough dye to get rid of any remaining bleach.

Storage

It’s crucial to store your pool cover in a cool, dry location when not in use. This will lessen the chance of the cover getting bent or blown up. To maintain your cover in good shape, you may also buy a cover storage bag.

How Frequently Should Your Pool Cover Be Cleaned?

Maintaining the best possible condition for your pool cover requires regular maintenance. You ought to try to clean your pool at least once a week, depending on when you use it. Try cleaning your environment more often if you live in a place where there is a lot of pollen or other dirt.

Bottom Line

One of the most essential elements of pool upkeep is cleaning the cover. To keep the cover in good shape, regular cleaning is important. A well-maintained pool cover can endure for many years. Your family and friends can enjoy cleanliness and safety. When your pool cover is installed and maintained properly. Thus, give your pool cover some TLC and relish many years of swimming enjoyment.