How To Winterize a Salt Water Pool

If you own a saltwater pool for the first time, you need to understand how to winterize a salt water pool as soon as possible. Winter is approaching. The good news is that winterizing saltwater pools is quite like closing rooted chlorine pools. Thus, if you’ve winterized a lake pool before, this shouldn’t be too hard for you.

The only difference between saltwater pools and chlorine pools is that even salt is twisted into chlorine. In light of this, you need to take every security to shield this salt-to-chlorine device from the severe winter weather.

Step-By-Step Guide On How To Winterize Saltwater Pool

This full tutorial will help you if you’re new to the process of winterizing your saltwater pool. Never forget, that maintaining pool safety requires careful planning throughout chilly winter months.

1. Squeak your saltwater pool’s accessories

If you’ve had your pool for a few months, you should be at ease with this process. Simply carry out routine maintenance procedures. Vacuum and clear debris from the pool. Also, wash the walls and floor. To prepare your saltwater pool for winter, run your filter for a few more hours once you’re done cleaning the interior.

Next, begin cleaning the filtration system in your saltwater pool. Even if the filter isn’t very dirty yet, it’s still good to replace it. This ensures that everything is clean before you close your pool. Before closing your saltwater pool, we tell you to give it a thorough cleaning. Once your pool is open again, there are benefits to doing this.

2. Check the chemical balance of the water in your pool

Once more, you must test your pool water to make sure the levels are right, like you would with regular pool care. The first thing you must to check is the salt level of the water in your pool. About 3,200 parts per million (ppm) of salt is the right level. Add salt as needed if the levels are too low. If it’s too high, wait for your levels to drip, and don’t add any more chemicals or salt until it reaches the perfect level.

You should be aware of the pH, total alkalinity, and calcium hardness of the water in your pool. For saltwater pools the pH level should be between 7.2 and 7.8. The ideal variety for total alkalinity is 80–120 ppm. The ideal range for calcium rigidity is 200–400 ppm.

3. Add your winterizing pool chemicals

It is now time to add your winterizing chemicals to your pool once you have stable the water. You’ll save money and time by doing this. Pool closing kits for saltwater pools include algaecide, scale, and stain sequestrant. They also have clarifier and chlorine-free pool shock.

Using enzymes is also advised because they clean the water in your pool of impurities. If particles manage to pass through and enter the water after your pool has been closed. Until you open your pool again, the enzymes will demolish it and keep it clean.

4. Winterize your pool equipment

First, confirm your saltwater chlorinator (SWC) and filter are clean and blank. For information on how to winterize your saltwater chlorinator, refer the owner’s guide. Removing and storing a SWC in a dry, cool place is the most popular method of winterization. Certain saltwater chlorinators can be kept off till the end of winter.

Ensure that all the water has been removed from your pool’s equipment. If you are unable to drain everything, you can leave a mixture of water and non-toxic antifreeze. Additionally, you need to winterize your skimmer. Plug it into the return fitting and fasten a winterizing skimmer plate.

5. Cover your pool

Before sealing your saltwater pool, you should use one or two air pillows, depending on how big it is. To keep the cover from sinking into your pool, air pillows provide support. They prevent big ice sheets from collecting on the sides of your pool and aid in the safety of your pool liner.

It’s time to cover your just-sized saltwater pool after you’ve added your air pillows. From the moment you install your pool cover until the conclusion of the winter, make sure you keep a watch on it. Any ice or snow that falls on top of your pool cover should be removed.

Use water bags to secure your pool cover so that wind or weather won’t blow it off. To keep them in their proper location, you can use a winch and cable.

Read Also: How To Close Above Ground Pool?

When Is a Saltwater Pool Reopenable?

The best time to open a saltwater pool is when the temperature usually rises over 70 degrees Fahrenheit. By doing this, algae buildup is reduced and swimming in the pool can begin earlier in the season. As the pool water heats up while the circulation pump is off, waiting for the weather to get hotter can increase the growth of algae.

Must Read: when were pools invented?

CONCLUSION

Winterizing your saltwater pool is a crucial first step in keeping it damage-free and ready for the upcoming swimming season. You can keep your pool in excellent condition. Adhere to these easy rules. This saves time and money on costly fixes. Remember to apply winterizing chemicals and clean the pool. Lower the water level, empty the equipment, and place winterizing plugs. Also, add a pool cover and balance the water chemistry. You can have a hassle-free swimming season the following year if you follow this advice.