Why is My Pool Cleaner Not Moving?

This is typically linked to issues with suction brought on by air in the vacuum hose or a blockage. Ensure your pool’s water level is high enough to cover the weir and return jets should be your priority. In this article, we will study common reasons for this issue. We will also feed a troubleshooting guide. This will help you get your automatic pool cleaner back in action.

Read Also: Why is My Polaris Pool Cleaner Not Moving?

Check for Obstructions:

The most common reason for an automatic pool cleaner to be standing is debris. These objects stop their movement. Inspect the cleaner’s wheels scrubs and input ports. Look for any leaves sticks or other blocks blocking its path.

Inspect the Hose:

Ensure that the hose is free from kinks twists or jams. A tangled hose can stop the proper flow of water limiting the cleaner’s power to move. Tidy out any tangles. Ensure the hose is linked to the cleaner and the pool’s skimmer. Check if it’s also tied to the true vacuum line.

Check Water Flow:

Bad water flow can check the cleaner’s movement. Inspect the pool pump and filter for any clogs. These might be limiting water circulation. Clean or backwash the filter and ensure the pump is used at the guided flow rate.

Examine the Pump Basket:

A blocked pump basket can lead to reduced water flow. This affects the automatic pool cleaner’s version. Remove and clean the pump basket to prevent debris buildup.

Inspect the Pool Cleaner’s Parts:

Read the cleaner’s parts such as the wheels gears and belts. Worn-out or hurt parts can hinder movement. Replace any damaged parts following the plant’s advice.

Check for Air Leaks:

Air leaks in the cleaner’s hoses or links can disrupt water flow. They can also hinder movement. Dip the hoses in the water and check for airdrops. If you find any check the hose ties and seals for damage and replace them as vital.