Why is the Zodiac Pool Cleaner Not Moving?

Zodiac pool cleaner not moving, Right? Don’t worry, this article will help you troubleshoot your zodiac pool cleaner. Zodiac pool cleaners are prone to a few problems. This is like other pool cleaning machines. In some cases, it can be hard to analyze and fix these problems on your own. We discuss common issues with popular models of Zodiac robotic pool cleaners. We offer advice for troubleshooting and fixing issues you may be experiencing.

Troubleshooting With Zodiac Robotic Pool Cleaners

This troubleshooting of the automatic Pool Cleaners is for the Zodiac CX20/CX35 and the Zodiac TX20/TX30/TX35 models. Most troubleshooting features overlay between these models. We have mixed the list into one. The ensuing guide will say any features unique to a particular model.

Troubleshooting Specific Issues

The cleaner is not anchored to the swimming area

If this happens to your machine there is air trapped inside of the machine. The filter unit may also be dirty. To remedy this, remove the machine from the pool and, if vital, clean the filter. Later, resubmerge your cleaner according to the manual.

Zodiac Pool Cleaner Not Moving

If your cleaner booths upon startup, it is having power link issues. Make sure that the machine and the power outlet you are using are working together. You should also remove the cleaner from the pool. Turn the wheels. Then part the control box for 20 seconds.

Floating Cable Becomes Tangled During Cycle

If the afloat cable becomes twisted during the cleaning cycle there could be too much or too little cord in the pool. To fix this only use as much cable as is needed to cover your pool’s area and leave a new line on the side of the pool. Ensure that the floating line enters the water near the hub of the length of your pool. This helps the machine’s mapping software and stops cord tangling.

Poor Cleaning Performance

If you are sharing a poor cleaning act the machine may have worn out scrubs. It may also have a full or muddy filter a kinked floating line or tire tracks coming off the wheels. To fix this return the brushes if they have become smooth or if the “wear” arrow shows. You should also open and clean your filter canister. To fix a kinked cable tidy it out and lay it in the sunlight while working out the kinks. Ensure the cable is not twisted during storage. When using the machine, make sure it is spread out and flows on the water.

Summary

If everything else fails, contact Zodiac Aid. They will do their best to help you and can arrange for the repair of your unit if vital.